The Geiger Cerberus Challenger Hellcat

May 24, 2019 By Mike
Last updated on May 24, 2019

Challenger Hellcat “Cerberus”: 890 hp for Dodge’s high-performance coupé
As the saying goes: “You cannot substitute power.” The retro sport coupé Challenger takes this slogan of all performance friends particularly to heart: Following on from the SRT Hellcat – introduced in 2014 – with a 717 hp and 6.2 liter V8 supercharger came the crowning achievement, the Demon – a limited edition providing up to 852 hp of power. The Hellcat was not only given an impressive facelift and power boost up to 728 hp, but also received an 808 hp offshoot with the nickname “Redeye”. The US car specialists at based in Munich have well and truly shown that there is still room for improvement when it comes to power: With their “Cerberus” model of the SRT Hellcat, they have unveiled a high-end version of the US coupé that burns rubber with 900 hp.

• 6.2-liter HEMI V8 now with 890 hp and 1,018 Nm

• Drive train with reinforced 4″ propeller shaft

• Hood in the style of the Challenger SRT Demon

This power upgrade was achieved by increasing the boost pressure – with the help of a modified supercharger wheel – to 1.1 bar. But GeigerCars have also overhauled the software in the engine control unit. So now, the 6.2-liter HEMI V8 generates 890 hp. At the same time, the torque was knocked up several notches to 1,018 Nm – a gain of almost 150 Nm over the series! And to make sure that the drive train can cope with this additional power, GeigerCars integrated a reinforced 4″ propeller shaft. The Challenger SRT Hellcat now also comes with a sturdy Brembo braking system: At the front, sixpiston calipers act on 391 mm ventilated and slitted disks, while four-piston calipers are mounted on 350 mm disks on the rear axle.

Another highlight are the aluminum forged rims of the coupé: They bear the name “Devil’s Rim” and were originally developed by Dodge exclusively for the Demon top model. Now, the 11×20″ wheels can also be ordered for the Hellcat models – in conjunction with the wide body package available since 2017. This gives the already stocky Challenger an even beefier appearance and, with their enlarged wheel cases, provides enough room for the rims, which are fitted with 305/35er tires. Otherwise, the Challenger looks more or less the same as it does off the line. A few exceptions to this include the new GFK hood, which resembles the one worn by the Demon with its broad air inlet placed far towards the front, and the design wrapping: Aside from the classic racing stripe in red and black, the white chassis also sports “” and “cerberus” in big letters on the sides as well as images of hell-hound heads – which have been adapted to the style of the well-known Hellcat logos.

The interior was left untouched, but also has one or two factory highlights: First and foremost is the high-quality leather upholstery in Demonic Red, which covers the seats and parts of the door trims and harmonizes perfectly with the black leather used in the rest of the interior and the red dials in the dashboard. The “Cerberus” also wows with the Uconnect infotainment system with its large 8.4″ screen and 18 speakers, available with a navigation system at an additional charge, as well as other amenities such as an electric sunroof, heated and ventilated seats, a central locking system with keyless entry, cruise control, electric windows, rear parking sensors, and two-zone automatic air conditioning.

Technical data: Dodge Challenger SRT Hellcat “Cerberus”

Engine: V8 HEMI gasoline engine with supercharger
Cubic capacity: 6.2 liters
Power: 654 kW (890 hp) at 6,320 rpm
Torque: 1,018 Nm at 5,610 rpm
Acceleration 0-100: 3.4 seconds
Top speed: 332 km/h
Transmission: 8-speed automatic transmission
Consumption in city/on highway/combined: 23.09 l/9.59 l/14.56 l per 100 km
CO2 emission, combined: 341 g/km
Emission class: Euro 6
Energy efficiency class: G
Vehicle price: €129,000 (second-hand vehicle)

*) All prices include installation and 19% statutory sales tax.

GeigerCars conversion

  • Performance kit consisting of boost pressure increase thanks to modified supercharger wheel, Geiger software optimization and 83-degree thermostat
  • Reinforced 4″ propeller shaft
  • GFK hood with Challenger SRT Demon look
  • Partial wrapping in Cerberus design